oil-water separator
英 [ɔɪl ˈwɔːtə(r) ˈsepəreɪtə(r)]
美 [ɔɪl ˈwɔːtər ˈsepəreɪtər]
网络 油水分离器; 油水分離器; 三相分离器得翻译成
双语例句
- High levels of drug aromatic oil can be extracted from the oil-water separator.
可提取高含量的药物芳香油，从油水分离器中取出。 - Oil-Water Separator Based on Restaurant Garbage Treatment Equipment
基于餐厨垃圾处理设备的新型油水分离器 - Design and Implementation of Controlling Oil-water Separator for Ships Detection System Based on MCU
基于单片机控制的船舶油水分离器监测系统的设计与实现 - Application of Oil-water Separator Unit in the Acidic Water Vapor
油水分离器在酸性水汽提装置中的应用 - New oil-water separator in mechanical cleaning system of oil tank
油罐机械清洗系统新型油-水分离装置 - Effect of Structural and Operating Parameters Acting on the Performance of Oil-water Gravity Separator
结构与操作参数对油水重力分离器性能的影响 - Sour water stripping unit was revamped by using DYF-110 type oil-water separator and "tank within tank" deoiling technology in Lanzhou Petrochemical Company.
采用DYF-110型油水分离器及“罐中罐”脱油技术，对中国石油兰州石化分公司酸性水汽提装置进行改造。 - Study on oil-water separating behavior of gravity separator
重力式油水分离器的分离特性研究 - Development of Wing and Angle-Plate Oil-Water Separator
带翼斜板油水分离器的研究 - Design of small ship oil-water separator
小型船用油水分离器的设计 - A mathematical model of the finned channel oil-water separator
带翼斜板油水分离装置的数学模型 - Motion characteristics of liquid drops in water-washing flow field of oil-water separator
油水分离器中水洗流场液滴运动特性分析 - On the basis of the structural configuration of the traditional static hydrocyclone, a new downhole oil-water separator is developed.
在借鉴传统静态水力旋流器结构形式和前期系列实验研究的基础上，给出了一种新型井下水力旋流油水分离器结构参数的确定方法； - This method is simple and clear, and can be used in calculation of oil-water separator with low oil content.
该方法简单、清晰，可方便地用于含水量小的污水除油板式分离器计算中。 - The direct calculating method about the concentration of oil in outlet stream of multi-plate oil-water separator is derived by introducing the concept of critical inlet position.
本文引入临界进口位置的概念，导出了板式油水分离器出口水中含油浓度的直接计算方法。 - The main constructional and operational ( parameters) of the composite coalescence-plate oil-water separator are also optimized to provide reasonable theory guidance for the optimization of industrial design.
文中还对复合聚结板式油水分离器的主要结构参数和操作参数进行了优化，为工程设计提供可靠的理论依据。 - The downhole oil-water separator is the core part of the downhole oil-water separation system.
井下水力旋流油水分离器是井下油水分离系统的核心部件。 - Development of high efficiency oil-water separator for Liaohe tidal zone oilfield
辽海滩海地区油田高效油水分离装置的研制 - Taking oil-water as working medium and carrying on liquid-liquid two-phase cyclone separating test, the authors developed a high efficiency oil-water cyclone separator.
以油水为工质进行了液&液两相旋流分离的试验。研制了一种高效的油水旋流分离器。 - The separating and flow behaviors of gravity oil-water separator were studied with an oil-water separation simulating system, taking white oil and water as work fluid. The separating efficiencies of six sampling outlets, oil outlet and water outlet were also analyzed.
利用重力式分离模拟试验系统，以白油和水作为工作介质，分析了6个取样口和油出口、水出口的油水分离效果，进而研究了卧式油水分离器的分离特性和流动规律。 - Application of HBY-3-100 Type Auto Oil-Water Separator in Wastewater Treatment
HBY-3-100型自动油水分离器在污水处理上的应用 - Researching on the process mechanism of mass-transfer of coalescence-plate oil-water separator, a ( novel) high efficiency composite coalescence-plate that can enhance the separating process was developed.
通过对聚结板式油水分离器传质过程机理的研究，开发出能够强化油水分离过程的新型高效复合聚结板。 - Through analyzing the air compressor, air dryer, oil-water separator and automatic water-removal valve, the paper discovered such problems as repeat of device function composed air passage, interference each other when device works and dry in air passage can't be continuously conducted.
通过对气路中的空压机、空气干燥器、油水分离器和自动排水阀进行分析，发现组成气路的器件功能重叠、元件工作时相互干扰以及气路中不能连续干燥等问题。 - The gravity-type oil-water separator is the main oil-water separation equipment to deal with oil sewage produced by ships.
重力式油水分离器是处理船舶油污水的主要油水分离设备。 - So the effect of oil-water separator is steady the flow and increasing the fusion efficiency and collision frequency by settlement cups.
所以，油水分离器的作用是通过沉降杯的几何结构使流体的流动稳定及增大油滴的聚并效率和碰撞频率。 - This paper chooses a gravity-type oil-water separator as research object, studies influence of different internal components to flow characteristics and separation characteristics of oil-water separator and optimizes the structure.
本文选用重力式油水分离器作为研究对象，研究了不同内部构件对分离器的流动特性和分离特性的影响，并对内部构件的结构进行优化，为油水分离器的优化设计和操作维护提供技术指导。 - The three-phase separator was chosen to separate oil, oil-water mixture and insoluble residue simultaneously in pilot-scale process 1. Then oil-water mixture was treated by the disk separator to obtain free oil, emulsion and hydrolysate solution.
在中试工艺1中引入三相离心机同时分离游离油、油水混合物和不溶残渣，并使用碟片离心机将油水混合物中的油和水进一步分离得到游离油、乳状液和水解液。 - The results showed that microwave demulsification had the virtue of improved emulsion broken, oil-water separator time saving, and always influenced by processing power and flow state during the experiments while electric heating was affected by processing power and settling time.
试验结果表明，微波破乳具有提高破乳效果、节省油水分离时间等优点，且受处理功率及流动状态的影响较大，而电加热受处理功率及沉降时间的影响较大。 - In improving the effectiveness and capacity, the crown-type oil-water separator has a unique advantage, with excellent oil field application.
通过理论分析和实验，可以得出，在提高含油污水的处理效果及处理量方面，皇冠型油水分离器有独特的优势，具备极好的油田现场应用价值。 - The Computational Fluid Dynamics ( CFD) method can be used to simulate internal flow field of the oil-water separator and floating trajectory of oil droplets, which offers effective means and methods of designing and optimizing the structure of oil-water separator, predicting the effect of oil-water separation.
利用计算流体动力学（CFD）的方法可以模拟油水分离器内部流场和油滴上浮的轨迹，从而为设计和优化油水分离器的结构，预测油水分离的效果提供有效的手段和方法。